18
Festo — EXCT — 2022-03a
Assembly
6.2.7
Removing transportation locks
• Keep the mounting brackets and transportation screws for further use.
1. Before starting mounting remove the following labelled transportation locks:
–
The transportation screws on the mounting kits.
–
The mounting brackets and transportation screws on the interface of the Z-axis.
2. Fasten a hoist to all transportation mounts of the product.
NOTICE
Product damage at the Z-axis due to lifting while tilted.
The Z-axis must not be stressed during lifting or mounting procedures.
• Do not lift the product at the Z-axis.
• Attach a suitable hoist to the transport mounts at all mounting kits on both sides.
• Lift the product without applying stress to the Z-axis.
1
2
3
4
2
1
Fig. 9: Transport mounts, EXCT-15 with 2 mounting kits as an example
1
Mounting kit with 2 transport mounts each
2
Transport mounts for lifting gear
3
Interface for the Z-axis
4
Z-axis
