EGSL
Festo EGSL 2017-11c English
10
EGSL-...
75
55
45
35
Max. screw-in depth
– Guide rail
[mm]
7.4
10.8
10.8
12.4
– Yoke plate
[mm]
8.4
8.4
8.5
12.9
Tightening torque
[Nm]
2.9
5.9
5.9
9.9
Fig. 7
For useful load geometries with projection in
the longitudinal direction of the slide:
Make sure that the useful load does not
strike against the motor.
Electrical installation
If proximity sensors are used:
Push the proximity sensors through the
cut-out
aC
on the housing cover into the
upper sensor slot.
The cable of a proximity sensor can be
guided away via the cross groove (C) into
the lower groove.
Protecting the end positions against
uncontrolled overrunning:
Check whether additional hardware proximity switches are necessary
.
Observe that this reduces the effective stroke (
è
catalogue specifications,
www.festo.com/catalogue).
Fig. 8
Fig. 9
aC
(C)
