Festo EGC FA Series, Инструкция по эксплуатации

Страница: 4 / 4

11.2 Repair
– Observe the instructions for dismantling
è
12 Disassembly.
– Send axis to Festo repair service.
– Information about spare parts and accessories
è www.festo.com/spareparts.
12 Disassembly
WARNING!
Unexpected movement of components
Injury due to impact or crushing.
•
Before working on the product: secure the slide to prevent unintentional
movement.
WARNING!
Risk of Injury due to Unexpected Movement of Components
For vertical or slanted mounting position: when power is off, moving parts can
travel or fall uncontrolled into the lower end position.
•
Bring moving parts of the product into a safe end position or secure them
against falling.
1. Disconnect electrical installations. (if applicable)
2. Remove the attached accessories. (if applicable)
3. Remove the mounted attachment component.
4. Remove the mounted connecting component to the drive axis.
5. Remove the mounting attachments.
6. Observe transport information
è 6 Transport and storage.
13 Disposal
Dispose of the product and packaging according to the valid provisions of envir­
onmentally sound recycling.
14 Technical data
14.1 Technical data, mechanical
To size the axis, use the PositionDrives engineering software
è
www.festo.com/sp.
EGC-70/80/120/185-FA
Size 70 80 120 185
Design Mechanical axis
Guide Recirculating ball bearing guide
Mounting position Any
Max. velocity
– EGC ­...­ GK 5
– EGC ­...­ GP
[m/s]
5 3
Max. acceleration [m/s
2
] 50
Ambient temperature [°C] –10 … +60
Degree of protection IP40
Max. permissible forces and torques on the slide
EGC­GK, EGC­GP
Fy [kN] 1.85 3.05 6.89 15.2
Fz [kN] 1.85 3.05 6.89 15.2
Mx [Nm] 16 36 144 529
My [Nm] 51 97 380 1157
Mz [Nm] 51 97 380 1157
EGC­GV, EGC­GQ
Fy [kN] 1.85 3.05 6.89 15.2
Fz [kN] 1.85 3.05 6.89 15.2
Mx [Nm] 16 36 144 529
My [Nm] 132 228 680 1820
Mz [Nm] 132 228 680 1820
Calculating the load comparison factor
fv
Tab. 10 General data, EGC­70/80/120/185­FA
EGC-70/80/120/185-FA
EGC-FA
Size 70 80 120 185
Materials
Note on materials RoHS­compliant
Contains PWIS
Profile
End cap
Slide Anodised aluminium
Guide
Screws Steel
Cover profile Acrylonitrile butadiene styrene
Buffer Nitrile rubber
Weight
Basic weight at 0 mm stroke [kg] 1.2 2 7.3 20.8
Additional weight per
1000 mm stroke [kg] 4.2 6.2 15 29
Tab. 11 Materials and weight
14.2 Characteristic curves
Support distance EGC-70/80/120/185-FA
Maximum permissible support distance L (without profile mounting MUE/central
support EAHF) as a function of force Fy/Fz with a maximum deflection of 0.5 mm.
Support spacing Force load
Tab. 12 Overview of support spacing and force load
EGC-...-FA
L [mm]
Fy[N]
500 1000 1500 2000 2500 3000 3500 4000
10
20
50
100
200
500
1000
2000
4000
EGC­70­FA
EGC­80­FA
EGC­120­FA
EGC­185­FA
Fig. 3 Support distances L as a function of force Fy
EGC-...-FA
L [mm]
Fz[N]
500 1000 1500 2000 2500 3000 3500 4000
10
20
50
100
200
500
1000
2000
4000
EGC­70­FA
EGC­80­FA
EGC­120­FA
EGC­185­FA
Fig. 4 Support distances L as a function of force Fz