Festo CTEU-EC, Описание

Страница: 75 / 110

3. Diagnostics
3-15
Festo P.BE-CTEU-EC-OP+MAINT-EN en 1208NH
3.3.6 I-port event code
The content for I-port 1 is in bytes 3 and 4; the content for
I-port 2 is in bytes 5 and 6.
Event code (hex.) Explanation Description/remedy
MSB LSB
00 00 Device OK (Default),
no malfunction I-port device is OK, no errors
10 00 Device NOK, unknown error I-port device is not OK,
unknown error
40 00 Temperature fault – Overload Temperature fault – Overload
42 10 Device temperature overrun –
Clear source of heat I-port device temperature
exceeded
•
Remove heat source
42 20 Device temperature underrun –
Insulate device I-port device temperature too
low
•
Thermally insulate the device
50 00 Device hardware fault –
Exchange device Hardware fault in the I-port
device
•
Replace device
50 10 Component malfunction –
Repair or exchange A component is malfunctioning
•
Repair or replace
50 11 Non-volatile memory loss –
Check batteries Loss of data from non-volatile
memory
•
Check batteries
50 12 Batteries low – Exchange
batteries Batteries are low
•
Replace batteries
51 00 General power supply fault –
Check availibility General fault in power supply
•
Check availability
51 01 Fuse blown/open - Exchange
fuse Fuse has tripped or is not
correctly inserted
•
Replace fuse or insert
correctly