Festo — CMMT-AS-...-S1 — 2021-04d
Safety
5
1
About this document
1.1
Target group
The document is targeted towards individuals who mount and operate the product. It is additionally
targeted towards individuals who are entrusted with the planning and application of the product in a
safety-oriented system.
1.2
Applicable documents
This document describes the use of the safety sub-functions safe torque off (STO/Safe torque off) and
safe brake control (SBC/Safe brake control) in accordance with EN 61800-5-2.
It is possible to implement the sub-function safe stop 1 (SS1/Safe stop 1) with a suitable external
safety relay unit and appropriate wiring of the servo drive.
•
Observe the safety instructions in the documentation
è
Operating instructions Assembly Installa-
tion Safety sub-function.
All available documents for the product
1.3
Product version
This documentation refers to the following version of the device:
–
Servo drive CMMT-AS-...-S1, revision R01 and higher, see product labelling
1.4
Product labelling
Product labelling
è
Manual Assembly, Installation.
1.5
Specified standards
Version
IEC 61800-5-1:2016
EN 61800-2:2015
EN ISO 13849-1:2015
EN 61800-3:2004+A1:2012
EN 60204-1:2006+A1:2009+AC2010
EN 61800-5-2:2017
EN 61131-2:2007
EN 62061:2005+AC:2010+A1:2013+A2:2015
EN 61508 Parts 1-7:2010
–
Tab. 1: Standards specified in the document
2
Safety
2.1
Safety instructions
It is only possible to determine whether the product is suitable for specific applications by also
assessing further components of the subsystem.
Analyse and validate the safety function of the entire system.
