Festo CMMT-AS Series, Перевод оригинальной инструкции

Страница: 37 / 44

Festo — CMMT-AS-...-S1 — 2021-04d
Technical data
37
Ambient conditions, transport
Permissible altitude [m] 12000 (above sea level) for 12 h
Vibration resistance Vibration test and free fall in packaging in accordance with
EN 61800-2
Tab. 20: Ambient conditions, transport
Ambient conditions, storage
Storage temperature [°C] −25 … +55
Relative humidity [%] 5
…
95 (non-condensing)
Permissible altitude [m] 3000 (above sea level)
Tab. 21: Ambient conditions, storage
Ambient conditions, operation
Ambient temperature
at nominal power [°C] 0
…
+40
Ambient temperature
with derating
(–3%/C at
40°C
…
50°C)
[°C] 0 … +50
Temperature moni-
toring Monitoring of:
–
Cooling element (power module)
–
Air in the device
Switch-off if temperature is too high or too low
Relative humidity [%] 5 … 90 (non-condensing), no corrosive media permitted near the
device
Permissible setup alti-
tude above sea level at
nominal power [m] 0
…
1000
Permissible setup alti-
tude above sea level
with derating
(–10 %/1000 m at
1000 m
… 2000 m)
[m] 0 … 2000
Operation above 2000 m is not permitted!
Degree of protection
in accordance with
EN 60529 IP20 (with attached mating plug X9A and with intended
mounting on closed backwall, otherwise IP10)
Requirements for
installation space Use in a control cabinet with at least IP54, design as “closed
electrical operating area” in accordance with IEC 61800-5-1,
Chap. 3.5