Festo CMMP-AS-Series-M0-STO, Руководство пользователя

Страница: 27 / 40

4 Commissioning
Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English 27
4.2 Support by FCT
No parametrisation is required for the safety function integrated in the motor controller.
4.2.1 Status display of the safety function
The status of the safety function is displayed in the FCT,
è
Tab. 4.1.
Properties Display Status
Status:
Status display
Green Normal mode (no STO requested)
Yellow STO requested and achieved
Red Safety circuit error
Input X40.STO­A:
Display of the input status
Grey Safety function requested, STO-A = Low
Green No safety function requested, STO-A = High
Input X40.STO­B:
Display of the input status
Grey Safety function requested, STO-B = Low
Green No safety function requested, STO-B = High
Output X40.C1/C2:
Display of the relay contact
Orange Safety function active, relay contact closed
Grey Safety function inactive, relay contact open
Tab. 4.1 Status of the safety function
4.2.2 Display log file of the motor controller
Error and status messages are logged in the permanent diagnostic memory of the CMMP-AS-...-M0 in a
non-volatile manner. You can read these messages under the online “Diagnostics” tab
è
Fig. 4.1.
Fig. 4.1 FCT-plug-in CMMP-AS: “Diagnostics” tab