Festo CMMP-AS-Series-M0-STO, Руководство пользователя

Страница: 20 / 40

2 Description of the safety function STO
20 Festo – GDCP-CMMP-AS-M0-S1-EN – 1412a – English
Time Description Value
T_K1 Delay between the switching of S1 and the closing
of the undelayed contact K1
è
Data sheet for the safety
switching device
T_K1_V Delay between S1 and the opening of the relapse
delayed contact K1
Can be set on the safety
switching device
T_STO-A/B_OFF STO-A/B – Switching time from High to Low
è
Section A.1.3, Tab. A.5
T_STO-A/B_ON STO-A/B – Switching time from Low to High
è
Section A.1.3, Tab. A.5
T_DRIVE_V Deceleration of the CMMP-AS-...-M0 0 … 10 ms
T_DIN5_SU Time for which the DIN5 must be Low after
switching on STO-A/B again and status change of
the integrated protection circuit

20 ms
T_BRAKE_V_ON Switch off delay of the holding brake Dependent on the brake
1)
T_BRAKE_V_OFF Switch on delay of the holding brake Dependent on the brake
2)
1) Physical delay until the brake closes.
2) Minimum time: Physical time delay until the brake opens. This time can be parameterised in the controller via a larger value.
Tab. 2.5 Time specifications to Fig. 2.5