6
Fixing bracket
BALANCING, AND LOCKING THE
CASTORS
Push the appliance into place. The
appliance must be installed at the same
level as the surrounding floor surface.
See page 5.
• Adjust the appliance to a straight
position, using the 2 adjusting screws
(A). This requires a 10 mm open ended
spanner.
• Tighten the locking screws (C).
• Turn the adjusting leg - in front, in the
middle - so that it touches the floor
(only 120C).
FITTING THE BOTTOM FRONT PLATE
Fix the bottom front plate in place. The
front plate sticks onto the bottom part
by means of clamps (B).
PREVENTION OF TILTING
The appliance must also be fixed to the
wall so that it is not possible for it to tilt
forward.
The fixing is done by means of the fixing
bracket at the top of the cabinet. If a gap
remains between the fixing bracket and
the wall, then use a suitable connecting
piece.
A
B
C
