HARDWARE
Page 9 of 11
7 COMMISSIONING
7.1 Installation
Attach the universal clamp lamp on the edge of a table or a bench and tighten the locking
screw of the clamp until a rigid and secure attachment is achieved. In this regard, always
choose a solid and resistant support surface.
7.2 Power supply / connection
To power the device, plug the cord into an appropriate 220 V / 50 Hz wall socket.
Connection
Ensure the the power plug is properly connected.
8 SWITCHING ON
After you have successfully installed the device, turn on the lamp, by putting the switch into
position "1".
The switch is located above the cap behind the magnifying lens.
Figure 4 - On button.
fervi.com
