HARDWARE
Page 8 of 11
4 IMPROPER USE AND CONTRAINDICATIONS
The following actions described, which obviously can not cover the entire range of potential
possibilities of "misuse" of the equipment, are to be considered
strictly prohibited.
IT IS STRICTLY FORBIDDEN!!!
To install and use the equipment on surfaces that are not strong enough to support its
weight;
To install and use the device on easily flammable surfaces;
To allow personnel to use the device who are insufficiently trained and who have not
read the instruction manual;
To use this device in environmental conditions not envisaged (in the external
environments with adverse weather conditions, exposed to direct sunlight, high
magnetic fields, etc.).
To use the device in places where there is dust, fumes, gases and/or vapours;
To use the device in places subject to high temperatures;
To use the equipment in humid environments.
To use the equipment in potentially explosive environments;
To replace the bulbs, and perform inspections and maintenance to the internal parts of
the device, without checking that the switch is in the "0" position and that the power
supply plug is disconnected;
To power the device with parameters different to those required and recommended;
Throw water onto the device and/or touch it with wet hands.
5 TRANSPORTATION AND MOVING
Lifting the equipment for transportation, can be done manually, by the operator. The
relatively low weight of the lamp allows it to be moved manually and safely without the
danger of injury to the operator. The operator must hold the lamp with both hands when
lifting and moving it.
6 UNPACKING INSTRUCTIONS
The lamp is supplied in a cardboard box. Before disposing of the shipping carton, check you
do not to throw away parts of the machine, the instruction "sheets" or other documentation.
Standard packaging
Packaging materials (plastic bags, polystyrene foam, etc.) must not be left within reach of
children as these are potentially dangerous.
fervi.com
