Ferroli Rendimax 16 CE, Инструкция по установке и эксплуатации

Страница: 9 / 20

9
S.p.A.
HONEYWELL V4600C GAS VALVE HONEYWELL V4600C GAS VALVE
HONEYWELL V4600C GAS VALVE HONEYWELL V4600C GAS VALVE
HONEYWELL V4600C GAS VALVE
Keep gas valve button 2 pushed down for 20 seconds then let it up slowly checking that the pilot
burner remains lit. If it goes out, wait 30 seconds then repeat the ignition operation.
Set the button 3 as shown in the fig. 3
Turn on the electricity to the boiler.
Position the boiler thermostat 1 (fig. 2) on the required temperature (not lower than 45
°
C). The main
burner switch-on and the boiler start working controlled by regulation thermostat of room thermostat
(if connected).
ELETTROSIT GAS VALVE
fig. 6
Key
1 Downstream pressure test point
2 Ignition/shut down button
3 Key for ignition
4 Shut down button
5 Upstream pressure test point
6 Pilot adjustment screw
7 Main burner adjustment screw
8 Slow opening adjustment screw
4.03 Igniting the boiler with HONEYWELL V4600C gas valve(fig 7a)
Position the boiler thermostat 1 (fig. 2) on minimum. Open the gas cock and vent the air present in
the tube upstream from the gas valve by opening the pressure point screw pos 3. Turn on the electricity
to the boiler. Ignite the pilot burner by
pressing the piezoelectric igniter 8 (fig.2) on
the left side of the boiler. Keep gas valve
button 1 pushed down for 20 seconds then
let it up slowly checking that the pilot burner
remains lit. If it goes out, wait 30 seconds
then repeat the ignition operation. Position
the boiler thermostat 1 (fig. 2) on the required
temperature (not lower than 45
°
C). The main
burner switch-on and the boiler start working
controlled by regulation thermostat of room
thermostat (if connected).
fig. 7a
Key
1 Ignition/shut down button
2 Pilot adjustment screw
3 Downstream pressure test point
4 Upstream pressure test point
7 Main burner adjustment screw