Ferroli Rendimax 16 CE, Инструкция по установке и эксплуатации

Страница: 7 / 20

7
S.p.A.
Fig. 4
3.02 Checking and controlling the evacuation of combustion products (total security)
The boiler is fitted with a FLUE GAS THERMOSTAT . This thermostat prevents gas from reaching the
burner if the flue is not drawing properly, providing greater security and control over the discharge of
combustion products.
If the FLUE GAS THERMOSTAT is activated, unscrew the protective cover on the control panel (Fig.
2 part. 13) and “reset” the thermostat manually. The boiler will then operate normally again.
If you replace the FLUE GAS THERMOSTAT, use original components only and make sure the electrical
connections are carried out correctly. NEVER EXCLUDE THE FLUE GAS THERMOSTAT FROM THE
ELECTRICAL CIRCUIT. If it keeps activating, contact qualified personnel only.
3.03 Pressure drop in relation to C.H. water flow rate (fig. 4)
Fig. 5a
3.04 Pump characteristics (only P.V. version)
1,2,3,=position of the built-in pump speed selector knob (fig. 5a)