Ferroli Rendimax 16 CE, Инструкция по установке и эксплуатации

Страница: 18 / 20

18
S.p.A.
Remember: To avoid unnecessary expense, before contacting Service Departement, make sure that
any boiler failure is not due to the absence of electric power or gas supply.
Incorrect flame regulation
Check flow rate at the gas meter and pressure at
the main burner
Boiler functions, but temperature fails to rise Incorrect flame adjustment
Check gas consumption is normal
Boiler dirty
Check and clean the boiler body
Boiler inadequate
Check that the boiler is the right size for the C.H.
system
Thermostat trips too high Thermostat bulb out of its sheath
Check the bulb is well inserted
Faulty adjustment on the panel
See section on adjustment
Condensation in boiler Faulty thermostat adjustment
Adjust the thermostat to a higher temperature
Faulty flame adjustment
Check that the main burner flame is properly
adjusted
Insufficient gas consumption
Check gas consumption is correct
The boiler becomes dirty easily Faulty flame adjustment
Check the main burner flame is adjusted
properly and that gas consumption is in line with
boiler output
The boiler including the pilot shut down Insufficient flame
Adjust the flame until it envelopes the
thermocouple as indicated in figure 12
Check the flue gas thermostat has not been
activated.If so reset it manually