Ferroli Rendimax 16 CE, Инструкция по установке и эксплуатации

Страница: 10 / 20

10
S.p.A.
Ignite Ignite Ignite Ignite Ignite
pilot pilot pilot pilot pilot
burner burner burner burner burner
Ignite Ignite Ignite Ignite Ignite
main main main main main
burner burner burner burner burner
Shuth-down Shuth-down Shuth-down Shuth-down Shuth-down
completely completely completely completely completely
the boiler the boiler the boiler the boiler the boiler
SIT NOVA 820 GAS VALVE
4.04 Igniting the boiler with SIT NOVA gas valve(fig 7b)
Position the boiler thermostat 1 (fig. 2) on minimum.
Open the gas cock and vent the air present in the tube upstream from the gas valve by opening the
pressure point screw pos4. (fig 7b)
Push and keep pushed the knob in the position “a”.
Ignite the pilot burner by pressing the piezoelectric igniter 8 (fig.2) on the left side of the boiler.
Keep gas valve button 1 pushed down for 20 seconds then let it up slowly checking that the pilot
burner remains lit. If it goes out, wait 30 seconds then repeat the ignition operation.
Turn the knob in the position “b”.
Turn on the electricity to the boiler.
Position the boiler thermostat 1 (fig. 2) on the required temperature (not lower than 45
°
C). The main
burner switch-on and the boiler start working controlled by regulation thermostat of room thermostat
(if connected).
fig. 7b
Key
1 Command knob
2 Main burner adjustment screw
3 Pilot adjustment screw
4 Inlet gas adjustment screw
5 Upstream pressure test point