Ferroli OMNIA HYBRID C, Инструкция по установке, эксплуатации и обслуживанию

Страница: 71 / 116

71
EN
Cod. 3541T090 - Rev. 00 - 06/2019
BOILER CONTROLLER - SERVICE MENU
0=Disattivato Descrizione Range Default
P48 DHW maximum power (b02=1) 0-100% 100%
DHW maximum power (b02=2) 0-100% 100%
DHW maximum power (b02=3) 0-100% 94%
DHW maximum power (b02=4) 0-100% 100%
P49 Comfort1 standby time (b01=1) 0-100minutes 20 minutes
Not implemented (b01=2) -- --
Not implemented (b01=3) -- --
Not implemented (b01=4) -- --
P50 Comfort2 standby time (b01=1) 0-100 minutes 42 minutes
Not implemented (b01=2) -- --
Not implemented (b01=3) -- --
Not implemented (b01=4) -- --
P51 Solar deactivation temperature (b01=1) 0-100°C 10°C
Setpoint deltaT (b01=2) 0-20°C 0°C
Solar deactivation temperature (b01=3) 0-100°C 10°C
Setpoint deltaT (b01=4) 0-20°C 0°C
P52 Solar ignition temperature (b01=1) 0-100°C 10°C
DHW ramp (b01=2) 1-20°C/minute 5°C/minute
Solar ignition temperature (b01=3) 0-100°C 10°C
DHW ramp (b01=4) 1-20°C/minute 5°C/minute
P53 Solar standby time (b01=1) 0-255 seconds 10 seconds
No effect on adjustment (b01=2) 0-255 seconds 0 seconds
Solar standby time (b01=3) 0-255 seconds 10 seconds
No effect on adjustment (b01=4) 0-255 seconds 0 seconds
P54 Heating deltaT temperature adjustment (b01=1) 0-60°C 18°C
Heating deltaT temperature adjustment (b01=2) 0-60°C 18°C
Heating deltaT temperature adjustment (b01=3) 0-60°C 18°C
Heating deltaT temperature adjustment (b01=4) 0-60°C 18°C
P55 Primary exchanger protection temperature (b01=1) 0-150°C 43°C
Primary exchanger protection temperature (b01=2) 0-150°C 43°C
Primary exchanger protection temperature (b01=3) 0-150°C 43°C
Primary exchanger protection temperature (b01=4) 0-150°C 43°C
P56 System min. pressure value 0-8bar/10 (Only for boilers with water pressure sensor) 4 bar/10
P57 System nominal pressure value 5-20bar/10 (Only for boilers with water pressure sensor) 7 bar/10
P58 Exchanger protection intervention (b01=1) 0=No F43, 1-15=1-15°C/second 10°C/second
Exchanger protection intervention (b01=2) 0=No F43, 1-15=1-15°C/second 10°C/second
Exchanger protection intervention (b01=3) 0=No F43, 1-15=1-15°C/second 10°C/second
Exchanger protection intervention (b01=4) 0=No F43, 1-15=1-15°C/second 10°C/second
P59 Heating hysteresis after ignition 6-30°C 30°C
P60 Timer for heating hysteresis after ignition 60-180 seconds 60 seconds
P61 Pump deactivation with OpenTherm (ATTIVE ONLY WITH FW
3)
0-1 0
Note:
1. Parameters with more than one description vary their function and/or range in relation to the setting of the parameter given in brackets.
2. Parameters with more than one description are reset to the default value if the parameter given in brackets is modified.
3. The Maximum Heating Power parameter can also be modified in Test Mode.
Press the Reset button to return to the Service Menu. Press the Reset button for 20 seconds to exit the card Service Menu, or exiting occurs automatically after 15
minutes.