Ferroli AQUA PLUS 160 HT, Руководство по установке и обслуживанию

Страница: 35 / 100

Installation and maintenance manual
pag. 11 / 23
4.3
Device mounting and connection
The device must be installed on a stable, flat floor
surface that is not subject to vibration.
/50
4.4
Water supply connections
Connect the cold water inlet and the outlet pipes
to the appropriate connection points (Fig.5).
The table below shows the characteristics of the
connection points.
MOD.
160 / 200 /
260
UM
Inlet cooling water G 1 “
Recirculation G 3/4 “
Outlet heating water G 1 “
Condensate drain G 1/2 “
Probe cockpit (only on models were
provided)
The following illustration (Fig. 8) shows an example
of a water supply connection.
Fig. 6 – Example of the water supply system
Fig. 5 – Water supply connections
6KXWRIIYDOYH
Check valve
6DIHW\YDOYH
([SDQVLRQYHVVHO
'UDLQWDS
5LFLUFXODWLRQSXPS
&KHFNYDOYH
$XWRPDWLFWKHUPRVWDWPL[LQJHTXLSPHQW