Ferroli 150-3V, Инструкция по установке, эксплуатации и обслуживанию

Страница: 30 / 112

Motor
06
4.2.2 Maintenance
NOTE
Only qualified technicians who have unit and refrigeration system experience can perform maintenance operation.
Proper gloves are required.
For dual-pipe system and four-pipe cold water coil, the water inlet and outlet joints are G3/4. For four-pipe hot water coil,the
water inlet and outlet joints are G1/2.
The casing of the unit is made of galvanized steel; the air filter is made of nylon fibre, and the aluminum alloy air filter can be
customized; the motor has internal overheat protection and overcurrent protection; a centrifugal rotating fan is used; a
soundproof material such as sponge is used; the fin type heat exchanger is composed of copper pipe and aluminum foil, and
the heat exchanger pipe connection can be changed on site.
Before maintenance or check, disconnect the unit from power supply, keep the main switch closed with warning sign attached,
to prevent others from resuming the power accidentally.
1) Routine maintenance
2) Once every month
Check whether the air filter is clean. The air filter is washable as it is made of fibre. When the unit is operational, make sure you
check the air filter every month.
3) Once every six months
Check whether the heat exchanger and condensate drain pipe are clean. After power disconnection, disassemble the unit to
check the heat exchanger and condensate drain pipe.
Figure 4-3 Unit uncased
Fan Filter Return air cover
Water inlet
Water outlet
Figure 4-2 Unit cased
Heat exchanger Air outlet grille Drain pan
Base Fan Filter Motor Casing
Water inlet
Water outlet
Heat exchanger Air outlet grille
Drain pan
Drain pipe
connection
Electric
control box
Electric
control box
4.2 Professional maintenance
4.2.1 Structure
(1