Ferris 5901852, Руководство оператора

Страница: 20 / 52

Not for
Reproduction
20 ferrismowers.com
10
For operator’s learning to drive the machine it is
recommended that the slowest speed setting (position # 1) be
used until the operator is comfortable driving the machine.
To adjust the Maximum Forward Speed Bar to the desired
position:
1. Bring the mower to a complete stop.
2. Pull the T-handle knob (D) out, move the maximum
forward speed bar desired hole location, release the T-
handle knob. Make sure that the T-handle knob locks the
maximum forward speed bar into place.
Smooth Travel
The ground speed control levers of the zero-turn riding mower
are responsive.
The BEST method of handling the ground speed control
levers is in three steps — as shown in Figure 11.
11
FIRST , place your hands on the ground speed control levers
and the maximum forward speed bar as shown.
SECOND , to go forward gradually push the ground speed
control levers with the palms of your hands evenly towards
the maximum forward speed lever.
THIRD , to speed up squeeze the ground speed control levers
to the maximum forward speed lever. To slow down smoothly,
slowly move the levers evenly towards neutral.
Basic Driving
Forward Travel Practice
12
Gradually move both ground speed control levers evenly
FORWARD from neutral. Slow down and repeat.