Ferris 5901852, Руководство оператора

Страница: 15 / 52

Not for
Reproduction
15
WARNING
If the unit does not pass a safety test, do NOT operate it.
See your authorized dealer. Under no circumstance should
you attempt to defeat the purpose of the safety interlock
system.
Features and Controls
Control Functions and Locations
The information below briefly describes the function of
individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in
specific sequences. To learn what combination and sequence
of controls to use for various tasks see the Operation section.
Unit Controls
5
A. Deck Lift Lever, Cutting Height Adjustment Pin, and
Deck Lift Release Button
B. Maximum Forward Speed Bar
C. Ground Speed Control Levers
D. Parking Brake
E. Transmission Oil Fill (Transmission Oil Reservoirs)
F. Battery Box
G. Fuel Tank Cap
H. Operator Platform
I. Transaxle Release Levers (Located behind Operator
Support Cushion)
Deck Lift Lever, Cutting Height Adjustment Pin, and Deck
Lift Release Button: The deck lift lever (B, Figure 6), cutting
height adjustment pin (A), and deck lift release button (C) are
used together to control the cutting height of the mower deck.
See Cutting Height Adjustment for instructions on using these
controls.
6
Cutting Height Adjustment Pin
Storage Hole for Cutting Height Adjustment Pin
Deck Lift Lock Lever
Maximum Forward Speed Bar: This unit is equipped with an
adjustable Maximum Forward Speed Bar (A, Figure 7), which
is located in front of the Ground Speed Control Levers (B &
C).