22
2. Layout and items supplied
2.1 Layout (Fig. 1-29)
1. Saw
table
2. Sawblade
guard
3. Laser
4. Splitter
5. Table
insert
6. Guide groove (saw table)
7. Bench width extension
8. Leg
(4x)
9. Middle strut (4x)
10. Tilt guard (2x)
11. Rubber foot (4x)
12. Size 10 wrench / saw blade
13. Size 10 wrench / wrench
14. Ring spanner
15. Cross stop (with lock bolt and knurled
nut (2x))
16. Knurled screw (cross stop)
17. Stop rail (cross stop)
18. Guide rail system (cross stop)
19. Push stick
20. Parallel stop (with lock bolt and knurled
nut (2x))
21. Window (parallel stop)
22. Stop rail (parallel stop)
23. Lock bolt (8x)
24. Hexagon screw, size M6 x 12 mm (4x)
25. Hexagon screw, size M6 x 16 mm (8x)
26. Spring washer (24x)
27. Washer, small (16x)
28. Washer, large (8x)
29. Hex nut (12x)
30. Knurled screw (table width extension)
31. Blade
32. Crank arm
33. Clamping screw
34. Clamping plate
35. Eccentric lever
36. Bar with scale (saw table)
37. Dust extraction connector
38. Locking screw
39. Crank wheel
40. Angle scale
41. Laser switch
42. Battery compartment cover
43. Operating switch (Green: I / Red: 0)
44. Hexagon screw (saw blade)
2.2 Items supplied
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and
any packaging and/or transportation
braces (if present).
•
Check to see if all the items are sup-
plied.
•
Inspect the equipment and accessories
for transport damage.
•
If possible, keep the packaging until the
end of the guarantee period.
F_TS_2000_1_GB_SPK7.indb 22
F_TS_2000_1_GB_SPK7.indb 22
04.06.2019 10:19:01
04.06.2019 10:19:01
