FERREX CHAINSAW 4-STROKE Скачать руководство пользователя страница 10

Страница: 10 / 50

Kapitelüberschrift

Scope of delivery

Chainsaw 4-Stroke

(1x)

Chain bar

(1x)

Saw Chain

(1x)

Spark plug spanner

(1x)

Chain guard

(1x)

Warranty card

(1x)

Instruction manual

(1x)

•

Open the packaging and take out the equipment with care.

•

Remove the packaging material.

•

Check that all listed contents are present.

•

Inspect the equipment and parts for any damage. Please contact the helpline if
anything is missing.

•

If possible, keep the packaging until the end of the guarantee period.

•

Read the operating instructions fully to familiarise yourself with the tool prior to
using it.

•

Only use original accessories and spare parts. Spare parts are available by
contacting the helpline.

•

Specify the part numbers when you contact the helpline.

ATTENTION!

The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, film and small parts!
There is a risk of swallowing and suffocation!

Scope of delivery

Содержание CHAINSAW 4-STROKE



















































Результаты поиска

Содержание CHAINSAW 4-STROKE

Отзывы:

Бренды по названию

Популярные бренды

FERREX CHAINSAW 4-STROKE, Руководство пользователя

Результаты поиска

Содержание CHAINSAW 4-STROKE

Отзывы:

Бренды по названию

Популярные бренды