Ferrari 599 GTB FIORANO, Руководство пользователя

Страница: 11 / 189

11
General
8
7
6
1
5
4
3
2
ECU
has completed its diagnostic cycle.
In these conditions, the protection
system has recognised the key code
and deactivated the immobiliser.
�
2) If the CODE warning light A remains
on and the EOBD warning light B
does not turn off after the
ECU
has
completed its diagnostic cycle, it
means that the code has not been
recognised. In this case, it is advisable
to turn the key back to position 0 and
then back to II . If the immobiliser
device remains active, try with the
other key provided.
If you are still unable to start the
engine, use the emergency starting
procedure (see page 10) and contact
the Ferrari Service Network .
�
- While driving, with the ignition key in
position II :
1) If the CODE warning light A turns on,
it means that the system is performing
a self-diagnostic cycle. At the fi rst
opportunity, you can stop and test the
system: switch off the engine by
turning the ignition key to position 0 ,
then turn the key back to position II .
The
CODE
warning light
A
will turn
on and should go off within one
second. If the warning light stays on,
repeat the procedure described
previously leaving the key at
0
for
more than 30 seconds.
If the problem persists, please contact
the Ferrari Service Network .
2)
If the
CODE
warning light
A
fl ashes,
it means that the vehicle is not
protected by the immobiliser.
WARNING WARNING
Contact the Ferrari Service Network
immediately to have all the keys
stored in the system memory.
WARNING WARNING
Each key supplied has its own
specifi c code, which must be stored
in the memory of the system ECU.
Duplicating the keys
If you request additional keys, provided
that the conditions to satisfy your request
are met, remember that the codes must be
stored (up to a maximum of 8 keys) on all
the keys.
Contact the Ferrari Service Network
directly and bring the following with you: