Ferrari 488, Руководство пользователя

Страница: 20 / 270

20
General
Replacing remote control batteries
If the key battery is insufficiently charged or only charged enough to
guarantee correct operating, the vehicle system informs the driver via
a message on the left TFT display (see page 84).
Replace the remote control batteries as follows:
- remove the metal bar
L
;
- open the key cover C using a small screwdriver at the position
indicated by the arrow;
- remove the battery
E
;
- insert a new battery of the same type, observing the indicated
polarity;
- close the key cover C ;
- re-insert the metal bar
L
.
Important note
Do not use sharp tools to remove the cover and be careful to
avoid damaging the remote control.
Electronic alarm
The electronic alarm system performs the following functions:
- remote control for central door locking/unlocking;
- perimeter surveillance, detecting if doors and lids are open;
- motion surveillance, detecting intrusion in the passenger compartment;
- vehicle movement surveillance.
Activation
To activate the alarm system, press button F on the ignition key:
- the turn indicators flash once;
- the system “beeps”;
- the red LED on the dashboard flashes;
- the central door locking system of the vehicle is activated and the
doors are locked.
The system activates after approximately 25 seconds.
When the electronic alarm is activated, the user may request
opening of the luggage compartment; in this case, the motion and
anti-lift sensors are temporarily deactivated.
C
E
G
F
L