Ferrari 488, Руководство пользователя

Страница: 124 / 270

124
About your Vehicle
With the wipers stationary (
OFF
), quickly pressing lever
A
towards
the dashboard activates the windscreen wipers in
AUTO
speed.
With the wipers on, quickly pressing the lever towards the
dashboard increases windscreen wiper speed (from
AUTO
to
1
,
from
1
to
2
).
With the wipers set to
AUTO
or
OFF
, holding the lever towards the
dashboard activates maximum speed (
2
). With speed
1
or
2
, on the
other hand, the windscreen wipers stop.
With the wipers on, quickly pulling lever
A back decreases
windscreen wipers speed (from
2
to
1
, from
1
to
AUTO
, from
AUTO
to
OFF
).
With the wipers stationary, quickly pulling the lever back activates
fast temporary operating of the wipers (antipanic wiping).
The windscreen wiper speed is indicated in the top of the left TFT
display as shown in the figure below.
Important note
Windscreen wiper operating is always guaranteed even if
there is an electronic system failure. If there is a failure, the
windscreen wipers can be activated by pressing lever A and
deactivated by pulling it back.
If there is a particularly serious failure, operating may not be
automatically maintained: if this is the case, the windscreen
wipers can be kept activated by holding down lever
A
.
Windscreen washer
To activate the windscreen washer, keep lever A pulled. When the
lever is released, the windscreen wiper returns to the preset speed.
Warning
Do not start the windscreen washer during the cold months
until the windscreen has warmed up. If it has not warmed up,
the liquid could freeze on the glass and interfere with visibility.
Headlight washer
The headlight washer is activated automatically when the
windscreen washer is operated and the low beams are on. The
headlight washer and windscreen washer share the same fluid tank
and a low fluid level is indicated by the relative symbol on the left
TFT display.
60°C
1.0 bar