7
Example
: encoder 400 pul/turn, wheel gear 100 teeth, encoder gear 26 teeth, wheel diameter 0.52
metres: Encoder Wheel: 1884
Number of motor encoder plant pulses (Encoder Motor)
Indicates the number of motor encoder pulses corresponding to a plant transplant.
This parameter is calculated with the following formula:
The “transmission ratio” coefficient must take into account all of the elements interposing between
the encoder and the element that deposits the plant.
Example:
encoder 400 pul/turn, gearbox ratio 3, gear_pipe / gear_element ratio 1: Encoder Motor:
2400
Note:
Calibration of parameters in the field
: the set values are theoretical and must therefore be
checked in the field. If the distance detected is
less
than the one set,
increase
the Encoder
Wheel parameter until the error is cleared. Vice versa, if the distance is
greater
,
reduce
the
Encoder Wheel parameter.
Number of rows (Rows):
Indicates the number of machine rows:
Machine working width (Track Width):
Indicates the machine’s working width (in centimetres): this parameter is necessary for calculating
the data for the number of plants transplanted per hectare and the number of hectares worked.
Unit of measurement (Meas. Unit):
Indicates which unit of measurement you prefer to use for setting the distance.
You can select "cm”
or "inch.
