Ferno XT Скачать руководство пользователя страница 12

Страница: 12 / 56

XT Extrication Device

Configuration of the extrication device

GREEN GROIN RESTRAINT

In order to apply the green groin restraint proceed as follows:
1. Insert the slot of the restraint part with the female end into

hole no. 12 on the left side of the device, with the stitching

facing the operator (upwards) (Figure 8A).
2. Pull the restraint and tie a knot by inserting the green

buckle in the restraint slot.
3. Firmly tighten the restraint around the hole (Figure 8B).
4. Insert the slot of the restraint part with the male end into

hole no. 9 on the foot end of the device, with the stitching

facing the operator (upwards) (Figure 8C).
5. Pull the restraint and tie a knot by inserting the green

buckle in the restraint slot.
6. Firmly tighten the restraint around the hole.

Figure 8 - Green groin restraint application

Detail 8D - Green restraint applied and buckled

SAME-SIDE CONFIGURATION FOR GROIN

RESTRAINTS

BLACK GROIN RESTRAINT

In order to apply the black groin restraint proceed as follows:
1. Insert the slot of the restraint part with the female end into

hole no. 5 on the right side of the device, with the stitching

facing the operator (upwards) (Figure 7A).
2. Pull the restraint and tie a knot by inserting the black

buckle in the restraint slot.
3. Firmly tighten the restraint around the hole.
4. Insert the slot of the restraint part with the male end into

hole no. 8 on the foot end of the device, with the stitching

facing the operator (upwards) (Figure 7B).
5. Pull the restraint and tie a knot by inserting the black

buckle in the restraint slot (Figure 7C).
6. Firmly tighten the restraint around the hole.

Figure 7 - Black groin restraint application

Detail 7D - Black restraint applied and buckled

Содержание XT

























































Результаты поиска

Содержание XT

Отзывы:

Ferno XT, Руководство пользователя и по обслуживанию, Страница: 12 / 56

Результаты поиска

Содержание XT

Отзывы: