manualshive.com logo in svg

Ferno XT, Руководство пользователя и по обслуживанию

Поделиться
Скачать
Ferno XT Скачать руководство пользователя страница 11

11

© Ferno s.r.l. MU-086-G Rel.01102019

XT Extrication Device 

RED CHEST RESTRAINT

In order to apply the red chest restraint proceed as follows:
1. Insert the slot of the restraint part with the male end into 

hole no. 4 on the right side of the device, with the stitching 

facing the operator (upwards).  
2. Pull the restraint and tie a knot by inserting the red buckle 

in the restraint slot. 
3. Firmly tighten the restraint around the hole. 
4. Move the red lifting and carrying handle outwards so that 

it is always within easy reach of the operator.
5. Insert the slot of the restraint part with the female end into 

hole no. 10 on the left side of the device, with the stitching 

facing the operator (upwards).  
6. Pull the restraint and tie a knot by inserting the red buckle 

in the restraint slot. 
7. Firmly tighten the restraint around the hole. 
8. Move the red lifting and carrying handle outwards so that 
it is always within easy reach of the operator.

Figure 6 - Crossed configuration of chest restraints

5A

5B

5C

5D

Figure 5 - Yellow chest restraint application

Detail 5D - Yellow restraint applied and buckled

CROSSED CONFIGURATION  

FOR CHEST RESTRAINTS

YELLOW CHEST RESTRAINT

In order to apply the yellow chest restraint proceed as 

follows:
1. Insert the slot of the restraint part with the male end into 

hole no. 13 on the left side of the device, with the stitching 

facing the operator (upwards) (Figure 5A).  
2. Pull the restraint and tie a knot by inserting the yellow 

buckle in the restraint slot (Figure 5B). 
3. Firmly tighten the restraint around the hole (Figure 5B). 
4. Move the red lifting and carrying handle outwards so that 

it is always within easy reach of the operator (Figure 5B).
5. Insert the slot of the restraint part with the female end into 

hole no. 7 on the right side of the device, with the stitching 

facing the operator (upwards) (Figure 5C).  
6. Pull the restraint and tie a knot by inserting the yellow 

buckle in the restraint slot. 
7. Firmly tighten the restraint around the hole (Figure 5C). 
8. Move the red lifting and carrying handle outwards so that 

it is always within easy reach of the operator (Figure 5C).

Configuration of the extrication device

Содержание XT

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды