14
© Ferno Washington Italia 26-S - Rel. 241115 ENG
26-S Self-loading Stretcher
Before commissioning the stretcher
Staff using the stretcher must have carefully read and
understood the information contained in this manual. Before
any operation with the stretcher ensure that:
●
all components, restraints, and mattress are present.
●
That the stretcher shows no signs of damage and
wear, and is fully operational. Refer to the
Inspection
section.
●
The vehicle is fitted with a Ferno locking system
compatible with the 26-S stretcher.
Instructions for Use
●
This manual does not provide any medical instructions.
●
It is the responsibility of the operators to follow correct
procedures and ensure the safety of both the patient
and themselves.
●
This manual explains the use of the stretcher under
ideal conditions and is purely indicative.
●
The stretcher should be used only by trained and
qualified staff.
●
Operators must work together and coordinate
properly during all operations.
●
Follow procedures while complying with standard
protocols for handling the patient in an emergency.
●
Lift only the weight that you can safely support. Obtain
additional help when working with heavy loads.
●
Always observe the instructions and local health
protocols.
●
Always assist the patient and never leave the patient
alone during operations involving the stretcher.
●
When changing the height (position) of the stretcher,
or while unloading it from the ambulance, make sure
the legs are locked before letting go of the main frame.
WARNING
Improper use of the stretcher can cause damage
and / or injury. Use the 26-S stretcher as described
in this manual.
WARNING
Never leave the patient alone while bound to
the stretcher. Always assist the patient during all
operations on a stretcher by two operators.
USING THE STRETCHER
Read the user manual
carefully
Loading capacity
MAX
181 kg
400 lb
2
Use with a minimum of two
qualified operators
WARNING
The use of improper or unauthorised devices may
cause accidents, damage and/or injury. Use only
devices that have been approved and authorised by
Ferno Washington Italia.
Important
For heavy loads, the two operators, after placing the
loading wheels on the floor and pushing the stretcher
onto the loading area securely, can move to the foot
end and push simultaneously. The same applies
to unloading: after having ensured the rear leg is
supporting, an operator returns to the central position
and controls the full movement of the front leg.
WARNING
Photos identified by "**"
are for illustrative purposes
only. Please read the instructions carefully. The picture
does not represent the product described in this instruction
manual, but only correct usage and functionality.
