Ferno 24 MAXX Скачать руководство пользователя страница 7

Страница: 7 / 31

24•MAXX®, 24•miniMAXX®, 24H•miniMAXX®

3 - abOUT The COT

3.1 Description

The Ferno

Models 24-MAXX

Cot, 24-miniMAXX

Cot,

and 24H-miniMAXX

Cot are mortuary-service products

designed for body transport.
In this manual, the term “cot” refers to all three versions of

the cot. Use of all three versions is identical. The cots differ

only in width and loading height. Where width or loading

height is discussed, the model name of the cot is used.
The cot is for professional use by one or more trained

operators. The cot is designed for use with a Ferno

Model

5 Mortuary Cot Fastener (not included). Two 7-foot, 2-piece

restraints and a 1-inch-thick, locking mattress are included

with the cot.

About the Cot

3.2 Cot Options

The cot may be ordered from Ferno with the accessories

shown below factory-installed. The accessories are also

available separately. To order, see

Accessories,

page 28.

Warning

improper use of the cot can cause injury. Use the cot

only for the purpose described in this manual.

Sidearms

Side Lift Handles

load limit

Inspect the cot if the load limit has

been exceeded (See

Inspecting the

Cot,

page 26).

COT FeaTUres:

●

1,000 lb (454 kg) load capacity

●

7 transfer positions

●

6 in. (152 mm) Swivel transport wheels with wheel

locks (operator end)

●

6 in. (152 mm) Fixed transport wheels (loading end)

●

5 in. (127 mm) Loading wheels at loading end; loading

ramp at operator end

●

Footrest

●

Independent locking legs reduce the lifting required

for loading and unloading

●

Legs can be locked at different heights at each end of

cot

●

Bed Width:

○

25 in./635 mm (24-MAXX)

○

22 in./559 mm (24-miniMAXX, 24H-miniMAXX)

●

Loading Height:

○

26 in./660 mm (24-MAXX, 24-miniMAXX)

○

32 in./813 mm (24H-miniMAXX)

●

Leg Color:

○

Burgundy (24-MAXX)

○

Gloss-black (24-miniMAXX, 24H-miniMAXX)

vehiCle inFOrMaTiOn

If the vehicle has a bumper extension, the extension should

not exceed 14 in. (356 mm). The rear compartment should

have a level floor large enough for the folded cot, and a

Ferno

cot fastener installed.

Содержание 24 MAXX
































Результаты поиска

Содержание 24 MAXX

Отзывы:

Бренды по названию

Популярные бренды

Ferno 24 MAXX, Руководство пользователя

Результаты поиска

Содержание 24 MAXX

Отзывы:

Бренды по названию

Популярные бренды