Ferno 24 MAXX Скачать руководство пользователя страница 4

Страница: 4 / 31

24•MAXX®, 24•miniMAXX®, 24H•miniMAXX®

Safety Information

1 -saFeTy inFOrMaTiOn

1.1 Warning

Warning notices indicate a potentially hazardous situation

which, if not avoided, could result in injury or death.

1.2 important

Important notices emphasize important usage or maintenance

information.

important

1.3 bloodborne Disease notice

To reduce the risk of exposure to bloodborne diseases

such as HIV-1 and hepatitis when using the cot, follow the

disinfecting and cleaning instructions in this manual.

1.4 Cot and Fastener Compatibility

Combining different manufacturers’ products into a “mixed-

component” cot/cot fastener system can increase the user’s

risk of injury and damage.
Ferno-Washington, Inc. strongly recommends that only

Ferno-manufactured cots be used in Ferno-manufactured cot

fasteners, and that only Ferno-manufactured cot fasteners be

used for securing Ferno-manufactured cots in vehicles.
ANY COMBINATION OF A FERNO COT OR COT

FASTENER WITH A NON-FERNO COT OR COT

FASTENER IS MISUSE OF THE FERNO PRODUCT.

Responsibility for the outcome of know, intentional misuse

rests squarely on the misuser.

Warning

Untrained operators can cause injury or be injured.

permit only trained personnel to operate the cot.
improper use of the cot can cause injury. Use the cot only

for the purpose described in this manual.
improper operation can cause injury. Operate the cot

only as described in this manual.
an unrestrained body can fall off the cot. Use restraints to

secure the body on the cot.
rolling the 24h-miniMaXX in the loading position can

cause it to tip. Use a rolling position when rolling the cot.
helpers can cause injury or be injured. Maintain control

of the cot, operate the controls, and direct all helpers.
improper maintenance can cause injury. Maintain the cot

only as described in this manual.
attaching improper items to the cot can cause injury. Use

only Ferno-approved items on the cot.
improper parts and service can cause injury. Use only

Ferno parts and Ferno-approved service on the cot.
Modifying the cot can cause injury and damage. Use the

cot only as designed by Ferno.

Содержание 24 MAXX
































Результаты поиска

Содержание 24 MAXX

Отзывы:

Бренды по названию

Популярные бренды

Ferno 24 MAXX, Руководство пользователя

Результаты поиска

Содержание 24 MAXX

Отзывы:

Бренды по названию

Популярные бренды