Ferno 24 MAXX Скачать руководство пользователя страница 25

Страница: 25 / 31

24•MAXX®, 24•miniMAXX®, 24H•miniMAXX®

Maintenance

7 - MainTenanCe

7.4 Disinfecting and Cleaning

the Cot

To disinfect:

Remove all restraints and the mattress from

the cot. Wipe all surfaces with disinfectant following the

disinfectant manufacturer’s directions for application

method and contact time. Ferno recommends that you

inspect the cot for obvious damage as you disinfect it.

To clean:

Hand clean all surfaces of the cot with warm

water and a mild detergent. Rinse with warm, clear water.

Dry with a towel or allow the cot to air-dry.

7.1 Maintenance schedule

The cot requires regular maintenance. Set up and follow

a maintenance schedule. The table at right represents

minimum intervals for maintenance.
Keep maintenance records. A sample maintenance record

sheet is provided on page 31.
When using maintenance products, follow the manufacturers’

directions and read the manufacturers’ material safety data

sheets. You can purchase a recommended disinfectant from

your Ferno distributor or Ferno Customer Relations (page 2).

7.2 Disinfecting and Cleaning

the restraints

Remove the restraints from the cot. Disinfect and clean only

as directed in the restraint users’ manuals provided with the

restraints. Additional, free users’ manuals can be obtained

from Ferno Customer Relations (page 2).

Minimum

Maintenance intervals

each U

eeded

each M

Disinfecting

(this page)

•

Cleaning

(this page)

•

Waxing

(page 26)

•

inspecting

(page 26)

•

lubricating

(page 27)

•

7.3 Disinfecting and Cleaning

the Mattress

1. Remove the mattress from the cot.
2.

To disinfect:

Apply disinfectant to the mattress

according to the disinfectant manufacturer’s

instructions for application method and contact time.

To clean:

Wash the mattress with warm, soapy water

and a soft cloth. Rinse the mattress with clear water.

Hang the mattress to dry, or dry it with a towel.

important

Disinfectants and cleaners containing bleach,

phenolics, or iodines can cause damage. Do not use

products containing these chemicals.

Warning

improper maintenance can cause injury. Maintain

the cot only as described in this manual.

important

Using abrasive cleaning compounds or applicators

on the cot can cause damage. Do not use abrasive

materials to clean the cot.

important

Water under high pressure, or steam, can penetrate

joints, flush away lubricant, and cause corrosion. Use

caution when cleaning moving parts such as joints and

hinges, and reapply lubricant if needed (see page 27).

Содержание 24 MAXX
































Результаты поиска

Содержание 24 MAXX

Отзывы:

Бренды по названию

Популярные бренды

Ferno 24 MAXX, Руководство пользователя

Результаты поиска

Содержание 24 MAXX

Отзывы:

Бренды по названию

Популярные бренды