Ferno 24 MAXX Скачать руководство пользователя страница 2

Страница: 2 / 31

24•MAXX®, 24•miniMAXX®, 24H•miniMAXX®

Serial Number _________________________
Location: Crosstube at loading end of cot.

Users’ ManUal

To request additional free users’ manuals,

contact Ferno Customer Relations, your

Ferno distributor, or visit www.ferno.com.

Disclaimer

This manual contains general instructions for the use, operation

and care of this product. The instructions are not all-inclusive. Safe

and proper use of this product is solely at the discretion of the

user. Safety information is included as a service to the user. All

other safety measures taken by the user should be within and under

consideration of applicable regulations. It is recommended that

training on the proper use of this product be provided before using

this product in an actual situation.
Retain this manual for future reference. Include it with the product

in the event of transfer to new users. Additional free copies are

available upon request from Customer Relations.

Ferno Technical support

Customer service and product support are important aspects of each

Ferno product. Please have the product serial number available

when calling, and include it in all written communications. For

technical support questions:
Telephone (Toll-free)

1.800.733.3766 ext. 1010

Telephone

1.937.382.1451 ext. 1010

[email protected]

Ferno Customer relations

For ordering assistance or general information:

CanaDa anD The U.s.a.

Telephone (Toll-free)

1.877.733.0911

Telephone

1.937.382.1451

Fax (Toll-free)

1.888.388.1349

Fax

1.937.382.1191

Internet

www.ferno.com

all OTher lOCaTiOns

For assistance or information, please contact your Ferno

distributor. If you do not have a Ferno distributor, please contact

Ferno Customer Relations:

Ferno-Washington, Inc.

70 Weil Way

Wilmington, Ohio 45177-9371, U.S.A.

Telephone

+1.937.382.1451

Fax

+1.937.382.6569

Internet

www.ferno.com

proprietary notice

The information disclosed in this manual is the property of Ferno-

Washington, Inc., Wilmington, Ohio, USA. Ferno-Washington, Inc.

reserves all patent rights, proprietary design rights, manufacturing

rights, reproduction use rights, and sales use rights thereto, and

to any article disclosed therein except to the extent those rights

are expressly granted to others or where not applicable to vendor

proprietary parts.

limited Warranty statement

The products sold by Ferno are covered by a limited warranty,

which is printed on all Ferno invoices. The complete terms and

conditions of the limited warranty, and the limitations of liability

and disclaimers, are also available upon request by calling Ferno at

1.800.733.3766 or 1.937.382.1451.

Содержание 24 MAXX
































Результаты поиска

Содержание 24 MAXX

Отзывы:

Бренды по названию

Популярные бренды

Ferno 24 MAXX, Руководство пользователя

Результаты поиска

Содержание 24 MAXX

Отзывы:

Бренды по названию

Популярные бренды