Ferno 0731305 Скачать руководство пользователя страница 37

Страница: 37 / 47

Maintenance

9.5 inspecting the Chair

Have your service’s equipment maintenance personnel

inspect the chair at regular intervals. Conduct a visual

inspection of the track system before use, and a thorough

inspection of the track system after each use.
Follow the checklists on this page and work the chair

through all its functions as described in this manual.
If inspection shows damage or excessive wear, remove the

chair from service until repairs are made. See

Parts and

Service,

pages 44-45.

ChaiR iNSPECTiON

●

Are all components present?

●

Is the chair free of excessive wear?

●

Are all screws, nuts, bolts, rivets, and roll pins securely

in place?

●

Do all moving parts operate smoothly and properly?

●

Do all locks on the chair operate properly?

●

Does the chair roll smoothly?

●

Are the restraints properly installed?

●

Is restraint webbing in good condition with no cuts or

frayed edges?

●

Are restraint buckles free of visible damage and do they

operate properly?

●

Do installed accessories operate properly without

interfering with chair operation?

●

Does the power switch function properly?

●

Do the paddles function properly?

●

Is there visible sign of damage to the motor, control

panel, batteries, or battery charger?

●

Does each battery attach properly to the motor?

●

Do the charge indicators on the battery and on the

control panel function properly?

●

Is the battery-charger power cord free of excessive

wear, cuts, and fraying?

TRaCk SySTEM iNSPECTiON

●

Are the tracks and belts free of lubricant, dirt and debris?

●

Is there visible damage to the track or belts?

●

Do the belts operate properly through the full range of

motion, without becoming loose or off-track?

●

Does the track system operate smoothly, without

binding or excessive noise?

●

Are the inner cords of the belts visible (indicating the

need for replacement)?

●

Are the belt-tensioning bolts and nuts tight?

9.6 Control-Panel batteries

Two AA batteries power the control panel. If the AA low-

battery icon (

) appears in the upper-right corner of the

display, replace the batteries.
Also, if there are no lights on the control panel and the

paddles stop functioning, replace the AA batteries.
Access the batteries by removing the access door on the

reverse side of the control panel.
The port for the interconnect cord (supplied) is near the AA

battery slots (Figure 53). See

Interconnect Cord,

page 41.

Port for

Interconnect Cord

Battery Tip

To extend battery life, always turn the power

switch OFF when the chair is not in use.

Содержание 0731305
















































Результаты поиска

Содержание 0731305

Отзывы:

Похожие инструкции для 0731305

Бренды по названию

Популярные бренды

Ferno 0731305, Руководство пользователя

Результаты поиска

Содержание 0731305

Отзывы:

Похожие инструкции для 0731305

Бренды по названию

Популярные бренды