Ferno 0731305 Скачать руководство пользователя страница 36

Страница: 36 / 47

9 - MaiNTENaNCE

Maintenance

9.2 Disinfecting/Cleaning Restraints

Ankle Restraint:

Place buckled restraint in a mesh bag

and launder in a washing machine using warm water, a

disinfectant soap, and gentle agitation. Hang the restraint to

dry. Do not put it in a dryer.

Chest and Lap Restraints:

Disinfect and clean restraints as

directed in the restraint users’ manual provided. Additional,

free users’ manuals can be obtained from Ferno Customer

Relations (page 2).

9.3 Disinfecting/Cleaning the Chair

To disinfect:

Remove restraints and seat and back panels.

Wipe all surfaces of the chair and panels with disinfectant.

Follow the disinfectant manufacturer’s directions for

application method and contact time.

To clean:

Wash panels and all parts of the chair with warm

water and a mild detergent. Rinse with clean water. Dry with

a towel or allow to air-dry.

9.4 Cleaning Tracks and belts

To ensure predictable belt performance, it is important to

keep the track and belts free of oil, grease, dirt, and debris.

1. Hold the belts away from the track frame and remove

any debris.

2. Clean both sides of the track frame, and both belts,

with SD-20

™

All-Purpose Cleaner and a clean cloth.

Follow instructions on the container.

3. Dry track and belts thoroughly.

Note:

To order SD-20

™

Cleaner in North America, contact

the Spartan Chemical Company, Maumee, Ohio, USA at

1.800.537.8990 or visit www.spartanchemical.com on the

internet.

important

Using abrasive cleaning compounds or applicators

on the chair can cause damage. Do not use abrasive

materials to clean the chair or PowerTraxx.

important

Disinfectants and cleaners containing bleach,

phenolics, or iodines can cause damage. Use caution

when disinfecting and cleaning with products

containing these chemicals.

WaRNiNG

improper maintenance can cause injury. Maintain

the chair only as described in this manual.

9.1 Maintenance Schedule

The chair requires regular maintenance. Set up and follow

a maintenance schedule. The table at right represents

minimum intervals for maintenance.
Keep maintenance records. A sample maintenance record

sheet is provided on page 47.
When using maintenance products, follow the manufacturers’

directions and read the manufacturers’ material safety data

sheets. You can purchase a recommended disinfectant from

your Ferno distributor or Ferno Customer Relations (page 2).

Minimum

Maintenance intervals

Each U

s N

eeded

Each M

Disinfect the Chair

(this page)

•

Clean the Chair

(this page)

•

Clean Tracks and belts

(this page)

•

Chair inspection

(page 37)

•

Track System

inspection

(page 37)

•

Lubricating

the Chair

(page 38)

•

adjust belt Tension

(page 39)

•

important

DO NOT PRESSURE WaSh

Water under high pressure, or steam, can

penetrate joints, flush away lubricant, and

cause corrosion. Do not pressure wash the

chair or PowerTraxx.

Содержание 0731305
















































Результаты поиска

Содержание 0731305

Отзывы:

Ferno 0731305, Руководство пользователя, Страница: 36 / 47

Результаты поиска

Содержание 0731305

Отзывы: