Ferm WBM1005, Оригинальное руководство пользователя, Страница: 6 / 44

6
EN
to ensure they do not play with the workbench.
This workbench is not developed for professional
use. The Foldable Workbench must be handled,
cared for and maintained in accordance with these
instructions. Any other use is deemed improper and
may result in damage to property or personal injury.
Technical specifications
Max. permissible load 150 kg
Working height 775 mm
Opened size 775 x 520 x 635 mm
Weight 4.8 kg
Description
The numbers in the following text refer to the
pictures on pages 2-4.
1. Screw
2. Bolt, nut, washer M6
3. Bolt, nut, washer M8
4. Wrench
5. Plastic foot
6. Bench clamp
7. Slide base
8. Crossbar
9. Table
10. Leg frame
3. ASSEMBLY
Fig. A
• Lay the Table tops (9) down with the screw
holes facing up.
Fig. B
• Fasten both Slide bases (7) onto the Table tops
(9) using the screws (1).
• Make sure the screws are tightened securely,
without overtightening.
Fig. C
• Connect the Leg frames (10) to the Slide bases
(7) by using the Bolt, nut, washer M8 (3).
If you prefer, you can do this while keeping the
workbench turned upside down.
• Do not overtighten the Bolts (3), as this will
prevent the workbench from folding and
unfolding easily.
Fig. D
• Place the Crossbars (8) onto the Leg frames
(10). Fasten by using the Bolt, nut, washer M6
(2). If you prefer, you can do this while keeping
the workbench turned upside down.
• Make sure the screws are tightened securely,
without overtightening.
Fig. E
• Attach the Plastic feet (5) to the legs.
• Note: The plastic feet are not symmetrical. The
‘highest’ part should be facing the outer corner
of the leg.
Fig. F
• Insert the Bench clamps (6) into one of the
holes of the Table tops (9).
4. OPERATION
Fig. G
To clamp a workpiece in the vice jaws, turn the
hand cranks in clockwise direction.
To unclamp a workpiece in the vice jaws, turn the
hand cranks anticlockwise.
Fig. H
When unfolding the workbench, make sure to
push the folding braces downwards.
To fold the workbench, first use the hand cranks
to fully clamp the vice jaws. Then push the folding
braces in upwards direction as shown in the figure
and fold the workbench. If this is difficult to do,
slightly loosen the screws shown in figure C.
5. MAINTENANCE
The workbench is designed to function
faultlessly for a long period and with a
minimum of maintenance. Extend its
lifespan by regularly cleaning the
machine and treating it correctly.
Cleaning
Regularly clean the workbench, preferably after each
use. Clean with a suitable proprietary household
cleaner and a soft dry cloth. Do not submerge your
workbench in water or any liquid for any reason. Do