Ferm Industrial WCM1001P, Оригинальное руководство пользователя

Страница: 6 / 56

6
EN
b)
Never place your hand near the rotating
accessory.
Accessory may kickback over your
hand.
c)
Do not position your body in the area where
power tool will move if kickback occurs.
Kickback will propel the tool in direction
opposite to the wheel’s movement at the
point
of snagging.
d)
Use special care when working corners,
sharp edges etc. Avoid bouncing and
snagging the accessory.
Corners, sharp
edges or bouncing have a tendency to snag
the
rotating accessory and cause loss of
control or kickback.
e)
Do not attach a saw chain woodcarving
blade or toothed saw blade.
Such blades
create frequent kickback and loss of control.
Additional Safety Warnings
• People below the age of 16 may not use the
machine.
• The user or operator must be familiar with
the content of this instruction manual.
• Before chasing in load-bearing walls,
consult with the responsible structural
engineer, architect or site supervisor.
• Use the power tool only when included
guard is installed. Guard must be securely
fitted to power tool and adjusted to
guarantee the best possible safety level,
which means that cutting disc part facing
operator must be shielded as much as
possible.
The guard must protect the operator
against splinters and accidental contact with
cutting disc.
• Use only diamond cutting discs. Possibility
of equipment installation in the power tool
alone does not guarantee safe use.
• Use diamond cutting discs only for tasks
they are designed for. For example, never
grind with side surface of a cutting disc.
Cutting discs are designed to remove material
with disc edge. Applying side force may break
disc of this type.
• Always use undamaged fixing flanges
with size matching to cutting disc.
Proper
flanges support cutting disc and reduce risk of
breaking.
• Secure the work area, also behind openings
and cut-outs.
Unsecured work areas can
endanger you and other people.
• Watch out for open and concealed
electricity cables, as well as water and
gas pipes. Use suitable detectors to find
concealed utility pipes and/or cables, or
contact a local utility company for advice.
Contact with electricity cables can cause fires
and an electric shock. Damage to a gas pipe
can cause an explosion. Penetrating a water
pipe causes damage to property or could
cause an electric shock.
• Whenever power tool can hit hidden
electric wires or its own power cord during
operation, hold it only by insulated handle.
When in contact with live wires all metal parts
of the power tool are live too, this may cause
electric shock of the operator.
• Avoid causing situations where other
people can stumble or trip.
Tripping over
cables can cause serious injuries.
• Secure the workpiece. A workpiece securely
held in clamping devices or a vice is more
safely held than in the hand.
• Avoid dust accumulation in the workplace.
Dusts can easily ignite.
• Ensure adequate ventilation in closed
rooms.
Risk due to dust and impaired vision.
• Dust from materials such as coatings
containing lead, several types of wood,
minerals and metals can be harmful
to health and cause allergic reactions,
respiratory diseases and/or cancer.
Asbestos-containing material may only be
machined by specialists.
- Wherever possible, use a industrial type
vacuum cleaner suitable for the material
you are working on.
- Ensure the workplace is properly ventilated.
- Observe the relevant regulations in your
country for the materials to be machined.
• Keep power cord away from rotating
working tools.
Loss of control over the power
tool can lead to cutting or catching the power
cord, also hand or whole arm can get into
rotating work tool.
• Do not carry power tool when it is rotating.
Accidental contact of rotating working tool with
clothes may cause its catching and plunging of
working tool into operator’s body.
• Do not start working before the power tool
reaches its full rotary speed.
• Do not expose diamond dry-cutting discs to