Ferax BCD-1013, Руководство пользователя

Страница: 35 / 64

31
ENGLISH
Original instructions
CONTENTS
1. Introduction ..........................................31
2. Technical specifications .......................31
3. Contents of packing .............................31
4. Product information .............................32
5 Safety instructions ................................32
5.1 Specific safety instructions ..................32
5.2 Important safety notes on charger and
batteryblok ...........................................32
5.3 Electrical safety ....................................33
5.4 Replacing cables or plugs ....................33
6 Mounting accessories ...........................34
6.1 Fitting and removing drill cutters ........34
6.2 Connecting and removing the battery ..34
7 Operation ..............................................34
7.1 Adjusting the speed ..............................34
7.2 Adjusting the torque ..............................35
7.3 Driving and removing screws ..............35
7.4 Drilling .................................................35
7.5 Environment .........................................35
7.6 Charging the battery .............................35
8 Service & maintenance ........................36
8.1 Cleaning ...............................................36
8.2 Lubrication ...........................................36
8.3 Faults ....................................................36
8.4 Environment .........................................36
8.5 Guarantee .............................................36
Spare parts list ...............................................55
EC conformity declaration ............................56
1. INTRODUCTION
Read the operating instructions care-
fully before using this device.
Familiarise yourself with its functions
and basic operation. Service the device as per
the instructions to ensure that it always fun-
ctions properly. The operating instructions and
the accompanying documentation must be kept
in the vicinity of the device.
2. TECHNICAL SPECIFICATIONS
Voltage .......................................... V 10.8
Charger voltage ............................. V 230
Charger frequency ........................Hz 50
Battery output ............................. Ah 1.3
Charging time............................hour 3-5
Drill speeds ...................................... 2
No-load speed
Position I ..................................r/min 0 - 350
Position II .................................r/min 0 - 1 250
Chuck capacity ...........................mm 10
Lpa (acoustic pressure) ..........dB(A) 68 + 3
Lwa (acoustic power) ............dB(A) 79 + 3
Vibration ................................... m/s
2
2.25 + 1.5
Vibration level
The vibration emission level stated in this
instruction manual has been measured in accor-
dance with a standardised test given in EN
60745; it may be used to compare one tool
with another and as a preliminary assessment
of exposure to vibration when using the tool for
the applications mentioned.
• Using the tool for different applications, or
with different or poorly maintainted accesso-
ries, may significantly increase the exposure
level.
• The times when the tool is switched off or
when it is running but not actually doing the
job, may signifi cantly reduce the exposure
level.
Protect yourself against the effects ofvibra-
tion by maintaining the tool and its acces-
sories, keeping your hands warm, and orga-
nizing your work patterns.
3. CONTENTS OF PACKING
1 Cordless drill
1 Battery
1 Battery charger
12 Bits
1 Operating instructions
1 Safety instructions