VTech T2451 - 2.4 GHz Analog Cordless Phone Скачать руководство пользователя страница 1

Страница: 1 / 44

When using your telephone equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and injury, including

the following:

Read and understand all instructions.

Follow all warnings and instructions marked on the product.

Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Do not use this product near water (for example, near a bath tub, kitchen

sink, or swimming pool).

Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product.

Slots and openings in the cabinet and the back or bottom are provided

for ventilation. To protect it from overheating, these openings must not

be blocked by placing the product on the bed, sofa, rug, or other similar

surface. This product should never be placed near or over a radiator or

heat register. This product should not be placed in a built-in installation

where proper ventilation is not provided.

This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of power

supply to your home, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this product

where the cord will be abused by persons walking on it.

Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short out parts that could result

in a risk of fire or electric shock. Never spill liquid of any kind on the product.

10.

To reduce the risk of electric shock, do not disassemble this product,

but take it to an authorized service facility. Opening or removing cabinet

parts other than specified access doors may expose you to dangerous

voltages or other risks. Incorrect reassembling can cause electric shock

when the appliance is subsequently used.

11.

Do not overload wall outlets and extension cords as this can result in

the risk of fire or electric shock.

Important Safety Instructions

All manuals and user guides at all-guides.com

all-guides.com

Содержание T2451 - 2.4 GHz Analog Cordless Phone













































Результаты поиска

Содержание T2451 - 2.4 GHz Analog Cordless Phone

Отзывы:

Похожие инструкции для T2451 - 2.4 GHz Analog Cordless Phone

Бренды по названию

Популярные бренды

VTech T2451 - 2.4 GHz Analog Cordless Phone, Руководство пользователя

Результаты поиска

Содержание T2451 - 2.4 GHz Analog Cordless Phone

Отзывы:

Похожие инструкции для T2451 - 2.4 GHz Analog Cordless Phone

Бренды по названию

Популярные бренды