FENTON MOBILITY PRODUCTS, 26 Center Street, Randolph NY 14772 - Shift N Step Operators Manual
9
ELECTRONIC OPERATOR OVERRIDE
Electronic Operator Override mode
–
If normal operation cannot be established by use of the push buttons, it
may indicate a problem with a sensor, certain circuit board problems, or some other electrical or mechanical
failure. If this should occur, it may be possible to temp
orarily move the carriage in an emergency or other “as
needed” situation by use of the operator override key switch. This switch bypasses most electronic devices and
all safety switches and provides a direct power supply to the drive motor. This mode is intended only as a
temporary bypass and the Shift-N-Step should never be operated using this override on a routine basis. Should
it become necessary to use this feature, it would indicate a problem exists somewhere in the normal operating
system. This problem must be investigated and resolved as quickly as possible.
To activate this mode, insert the key into the switch
Rotate the switch clockwise to move the carriage right
or counter-clockwise to move the carriage left.
