FENTON MOBILITY PRODUCTS, 26 Center Street, Randolph NY 14772 - Shift N Step Operators Manual
7
NORMAL OPERATION
Normal Operation
. The Shift-N-Step is powered by the vehicles electrical system. It activates when the lift door
is open. Pressing the “Normal Operation” push buttons will move the carriage left
(Left Button)
or right (Right button). As long as the button is held in, the carriage will continue to move until it is detected by
a sensor (at each end of the carriage travel) at which point movement will stop.
(NOTE- Operator override key switch disregards these sensors). If the button is released at any time during
movement, the carriage will immediately stop. In the event of an emergency situation in which the carriage
must be stopped or reversed, immediately release the button to stop movement or press the opposite button to
reverse movement.
