2- General Informations
2.1 Applications
FeniX induction heaters has been designed to heat bearings; moreover, other metal
workpieces that form closed circuit like bushings, flange couplings, shrink rings, pulleys and
gears can be heated. Except special orders, maximum teperature limited to 250 °C .
Caution!
•
Generally bearings should not be heated over 110 °C(at an
ambient temperature of 20 °C.
•
Exquisite bearings should not be heated over
70 °C, that may couse
damage on the bearing.
•
Demagnetization will not occur if the machine unpluged or the
main switch is switched off during operation.
•
When the machine operating, and the power is lost and
restored, please select one of the modes and operate the
machine for a while to do workpiece's demagnetisation.
2.2 Recomended Operating Environments
For proper use of the machine, the following chart provides important information
concerning the recommended operating environments, or operating conditions.FeniX
Induction heaters designed for indoor use only.
•
Operating Temperature
0ºC to 40ºC
•
Operating Humidity
5% to 90%
•
Transport/Storage Temperature
-20ºC to 60ºC
Warning!: Operating the machine outside of the recommended operating environment
may negatively impact the machine performance, may cause damage to the machine
and will void the warranty!
5/16
Feni
X
Induction Heaters
