•
If you want to stop the oparation before reaching set temperature, press button
7
.
demagnetisation will start automaticly.
•
When coundown finishes, demagnetisation will start and you will see the screen
below and the machine will generates an acoustic signal for few seconds. The
machine will be ready to new operation when demagnetisation process ends
7- Overload Warning
FeniX induction heaters designed to change maximum power level automaticly
depending on workpiece's conductivity and size. Power level can be decreased %2 of
total power. If power level is still over the machine design power, the machine will stop
operating and you will recieve screen below.
OVERLOAD
CHANGE PART!
First Switch Off the machine then Switch it On. If you were working in Turbo Mode, try to
work in Normal Mode. If that will not solve your problem, please contact with us for our
other heater models.
14/16
Feni
X
Induction Heaters
