TS1700/TK18 PRINTERS OPERATION MANUAL
[Notes for
1)
]
●
The printer cuts paper at the current position, even when the black mark is
enabled.
[Notes for
2)
]
●
Black mark disabled:
–
When
n
= <00>H, the printer feeds paper “
Cutting-D
” and cut it.
–
When
n
≠
<00>H, the printer feeds paper (“
Cutting-D
” + [
n
x 0.0625 mm]) and
cuts it.
●
Black mark enabled:
–
When the black mark sensor is set to be effective, the printer feeds paper to
(black mark
±
[(value which is set by
GS ( F
) x 0.0625mm]) and cuts it. After
cutting, it feeds paper to the position specified by the command
GS ( F
. See point
– Black mark sensor
.
[Default]
n
= <00>H
[Reference]
GS ( F, ESC i, ESC m
GS
a
n
[Name]
Automatic status report
[Format]
ASCII
GS
a
n
Hex
1D
61
n
Decimal
29
97
n
[Range] <00>H
≤
n
≤
<01>H, <30>H
≤
n
≤
<31>H
[Description]
●
Enable/disable automatic status report.
n
Function
<00>H / <30>H
Disable automatic status report
<01>H / <31>H
Enable automatic status report
●
When enabling the automatic status report, the printer remains in this state
indefinitely, until it becomes disabling, or until switch the power off.
●
After enabling the automatic status report, the printer returns the 5 states mentioned
in the command
DLE EOT n
, every 0.5 seconds in the following order:
First
status
sent
........................................ Last
status
sent
(
status1
) ................................................ (
status5
)
status1
= Transmit printer status
status2
= Transmit offline status
status3
= Transmit error status
status4
= Continuous paper sensor status
status5
= Paper sensor status
[Default]
n
= <30>H
[Reference]
DEL EOT
GS
f
n
[Name]
Select font for Human Readable Interpretation (HRI) characters
[Format]
ASCII
GS
f
n
Hex
1D
66
n
Decimal
29
102
n
[Range]
<00>H
≤
n
≤
<01>H, <30>H
≤
n
≤
<31>H
[Description]
Selects a font for the HRI characters used when printing a bar code.
n
selects a font from the following table:
n
Font
<00>H / <30>H
Font A (12x24)
<01>H / <31>H
Font B (8x16)
[Notes]
●
HRI indicates Human Readable Interpretation.
●
HRI characters are printed at the position specified by
GS H.
●
HRI characters are always printed at X-Scale = 1 and Y-Scale = 1
[Default]
n
= <01>H
[Reference]
GS H, GS k
47/62
