Fenix Imvico TS1700, Руководство по эксплуатации

Страница: 42 / 62

TS1700/TK18 PRINTERS OPERATION MANUAL
●
The ESC ! command can also turn double-width and double-height modes on or off.
However, the setting of the last received command is effective.
[Default] n = <00>H
[Reference] ESC !
GS ( A pL pH n m
[Name] Execute test print
[Format] ASCII GS ( A pL pH n m
Hex 1D 28 41 pL pH n m
Decimal 29 40 65 pL pH n m
[Range] ( pL + ( pH x 256)) = 2 (where pL = <02>H, pH = <00>H)
<00>H
≤
n
≤
<02>H, <30>H
≤
n
≤
<32>H
<01>H
≤
n
≤
<03>H, <31>H
≤
m
≤
<33>H
[Description]
●
Executes a test print with a specified test pattern on a specified paper.
●
pL , ph specifies ( pL +( ph x256)) for the number of the bytes after ph ( n and m ).
●
n specifies the paper to be tested.
n Paper
<00> / <30>H
<01> / <31>H
<02> / <32>H Paper roll
•
m specifies a test pattern.
m Test pattern
<01> / <31>H Hexadecimal dump
<02> / <32>H Printer status print
<03> / <33>H Rolling pattern print
[Notes]
●
This command has enabled only when processed at the beginning of a line.
●
After the test print is finished, the printer resets itself automatically. Therefore, data
already defined before this command is executed, such as user-defined buffer and
print buffer are cleared; and each setting returns to the default value.
●
The printer cuts the paper at the end of the test print.
G S ( C pL pH NULL 6 NULL C L R
[Name] Erase all logos
[Format] ASCII GS ( C pL pH NULL 6 NULL C L R
Hex 1D 28 43 pL pH 00 36 00 43 4C 52
Decimal 29 40 67 pL pH 00 54 00 67 76 82
[Range] pL = <06>H (fixed), pH = <00>H (fixed)
[Description] Erases all logos stored in non-volatile memory.
[Reference] FS p, FS q commands.
GS ( G n L n H m L m H
[Name] Set ticket length and cut offset related to black mark
[Format] ASCII GS ( G nL nH mL mH
Hex 1D 28 47 nL nH mL mH
[Range] 0
≤
( nL + nH x 256)
≤
65535
0
≤
( mL + mH x 256)
≤
65535
(where <00>H
≤
nL , nH , mL and mH
≤
<FF>H)
[Description] ( nL + nH x 256) specifies the total ticket length in dots (0.125 mm) and ( mL + mH x
256) sets the offset distance, also in dots, between the top of the black mark and the
next cutting line of the ticket in the paper feed direction (see section
- Black mark
sensor ).
[Notes]
●
Normally, the first ticket printed after powering up the printer must be discarded as it
will have different length that the following ones.
●
This command takes into account the distance from the black mark sensor and the
cutter blade which is fixed in a particular assembly. For this reason, this distance
must be kept if a different implementation is taken.
42/62