TS1700/TK18 PRINTERS OPERATION MANUAL
ESC
a
n
[Name]
Select justification
[Format]
ASCII
ESC
a
n
Hex
1B
61
n
Decimal
27
97
n
[Range]
<00>H
≤
n
≤
<02>H, <30>H
≤
n
≤
<32>H
[Description]
Aligns all the data in one line to the specified position.
n
selects the justification as follows:
n
Justification
<00>H / <30>H
Left justification
<01>H / <31>H
Centered
<02>H / <32>H
Right justification
[Notes]
●
The command is enabled only when processed at the beginning of the line.
●
This command executes justification in the printing area.
[Reference]
ESC !
[Example]
Left justification
Centered
Right justification
ESC c 4
n
[Name]
Select paper-near-end sensor to stop printing
[Format]
ASCII
ESC c
4
n
Hex
1B 63 34
n
Decimal
27
99 52
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description]
Selects whether the paper-near-end sensor stops printing.
When the bit 1 of
n
is 0, paper near-end sensor does not stop printing.
When the bit 1 of
n
is 1, paper near-end sensor will stop printing.
[Notes]
When bit 1 is on, in paper-near-end is detected, the printer goes offline and stop
printing.
ESC c 5
n
[Name]
Enable/disable the on-board button
[Format]
ASCII
ESC c
5
n
Hex
1B 63 35
n
Decimal
27
99 53
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description]
Enables or disables the on-board button.
When the LSB of
n
is 0, the on-board button is enabled.
When the LSB of
n
is 1, the on-board button is disabled.
[Notes]
Only the lowest bit of
n
is valid.
[Default]
n
= <00>H
ESC
d
n
[Name]
Print and feed
n
lines
[Format]
ASCII
ESC
d
n
Hex
1B
64
n
Decimal
27
100
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description]
Prints the data in the print buffer and feeds
n
character lines.
38/62
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
