Fender Passport 150 Pro, Руководство пользователя

Страница: 8 / 36

fender.com fender.com
8 8
Passport® 150 Pro Passport® 150 Pro
Master Controls Master Controls
VOLUME—
Use to adjust the overall loudness of your Passport
Pro. When this knob is rotated fully counter-clockwise, there
will be no sound coming out of the Passport speakers.
TONE—
Use to adjust the overall tone character of your
Passport Pro. Select the center detent position for no
equalization. Rotate clockwise to boost high frequencies
and reduce lows, or conversely, rotate counter-clockwise to
reduce highs and boost lows.
Channel Controls
SIGNAL PRESENT / CLIP INDICATOR—
This LED
illuminates green to indicate an input signal level
is present in the channel. It turns orange when
the input signal level gets closer to clipping and
red during clipping (distorting). If you see
red ,
reduce the input signal level at the source, or
press the PAD
button in.
LEVEL—
Use to adjust each channel's volume
relative to the loudness of the other channels.
TONE—
Use to adjust the tone character of each
channel. In the center detent position the tone
control is "flat" and has no effect on the channel's
sound.
REVERB—
Adjusts the level of the Reverb effect in
each channel.
PAD—
Press in to reduce the input sensitivity of the channel
by 20dB if the source level is too high (see above).
Mono Channel Inputs
MIC—
Plug your microphone into this jack.
LINE—
Plug an instrument or other line level mono
source into this jack. This input accepts balanced
and unbalanced sources.
Stereo Channel Inputs
1/8" STEREO—
Plug your CD player, MP3 player,
computer audio interface, or other line-level, stereo
source into this jack.
1/4" LEFT (MONO) / RIGHT—
Plug a line-level stereo
source that requires separate 1/4" connections for
each channel, into these jacks. You can also use a
stereo channel as a mono channel by using only
the L/Mono jack (mono output will be through
both speakers).
Front Panel Output
STEREO OUT—
Connect recording
equipment here. Master Volume
does not effect this output, but each
of the channel controls do.
LEVEL—
Adjusts the output level of the Stereo Out jack to
accommodate the input level requirements of your recording
equipment.
Power / Protect LEDs
POWER / PROTECT—
The Power LED will
illuminate green when the Passport is turned on.
If audio output from the Passport shuts off, the
unit may have shutdown to protect itself from
electrical or thermal trouble. The Passport will reset itself as
soon as the problem has been resolved. If the Passport will
not reset, check the Fuse
in the Power Socket.
TONE VOLUME
1
PAD
LEVEL
TONE
REVERB
STEREO
L / MONO
RIGHT
STEREO
OUT
LEVEL
POWER
LINE
MIC
Master Controls
Channel Controls Channel Controls
Mono Channel Inputs
Stereo Channel Inputs
Front Panel Output
Power / Protect LEDs