10
EN
1.5
SAFETY PROCEDURS FOR FURTHER RISK
WARNING:
Always keep hands away from the working areas
while the machine is moving: before loading or
unloading the part, release the run button on
the hand grip.
• Always keep processing residues away from the cutting
area.
• Always use the clamp. The parts to be cut must always
be held firmly in the clamp.
• Before carrying out any maintenance work, always
disconnect the power cable for the mains.
• Check that all safety guards are sound and positioned
correctly before starting any work.
1.6
NOISE CONDITIONS
In normal conditions of use as described in this manual,
this belt sawing machine determines an equivalent level of
acoustic pressure:
*
Eg. cutting of a steel FE 52 tube D.160 mm thickness 10
mm, at cutting speed of 30 Mt/min., with a weighted
operating cycle of 3 minutes.
Leq
Leq
Version
(when operating
(during
unloaded)
processing)
*
Single phase
81,0 dB(A)
82,5 dB(A)
Three phase
79,0 dB(A)
81,2 dB(A)
The frequency root mean RMS weighed for hand-arm
acceleration does not exceed 2.5m/s².
Measurement were obteined in compliance with UNI
7712, ISO 3740, ISO 3746 and EEC 89/392 regulation.
NOTE: Personal hearing protection should be
used, such as headphones or earplugs.
1.7
INFORMATION ABOUT ELECTROMAGNETIC
COMPATIBILITY
The european regulations on safety and in particular the
EEC directive 89/336 contemplate that all the equipment
be equipped with shielding devices against radio
interferences both from and towards the outside.
This machine is equipped with filters both on the motor and
on the power supply through which the machine is safe and
in compliance with above regulations.
Tests were carried out according to EN 55011, EN
55014, EN 50082-1, IEC 1000-4-2 and IEC 1000-4-4
regulations.
1.8
DESCRIPTION OF THE MACHINE (Fig. 1)
The machine consists of a machine body
D
complete with
motor
F
and gear transmission. Connection to the bottom
is obtained by means of a rotating support
H
.
The quick sliding chuck
O
is completely made up of cast
iron while the basic tank in pressed steel for the collection
of the coolant serves also as connecting base
N
with the
machine bed
R
(optional).
Here is a list of the main parts with the number indicating
it in the drawing.
A
Command grip
B
Blade tensioning device
C
Sliding blade guide
D
Machine body
E
Blade
F
Motor
G
Control box
H
Swivel support
I
Shock absorber
L
Cooling liquid pump
M
Bar stop
N
Tank-base
O
Vice
P
Clamp drive
Q
Vice speed-slide drive
R
Column
(optional)
SINGLE PHASE VERSION
WEIGHT = 89 Kg.
SIZE =
cm 575 x 670 x H 720 in maximum overall
dimensions.
PACKAGING SIZE = cm 585 x 680 x H 730
THREE PHASE VERSION
WEIGHT = 99 Kg.
SIZE = cm 575 x 670 x H 720 in maximum overall dimensions.
PACKAGING SIZE = cm 585 x 680 x H 730
2
INSTALLATION
2.1
REMOVING THE PACKING
The machine is delivered inside a box suitable for the
purpose.
Therefore, the packing must be removed completely by
means of suitable tools and care must be take in order to
avoid damage to any part of the machine.
For packing disposal, please refer to 6.4 point.
2.2
HANDLING AND TRANSPORTION (Fig. 2)
The machine and must be moved only using suitable lifting
devices.
WARNING:
Do not try to move or lift the machine by hand
even if more people are present.
WARNING:
The operations described in this manual relative
to sling, transport and lifting by means of a fork
lift or hoist must be carried out only by skilled
and qualified personnel (EEC/98/37).
