15
EN
EVERY WEEK
• Lubricate the slides of the sliding blade guide and the
swivel support and the nut screw of the chuck.
• Remove the chips from the area of the coolant collecting
filter.
• Clean the sawblade guide plates with a brush.
• Check that all machine safety guards are not damaged
and that the start push button works properly.
• If the saw is not used for a long period of time, clean and
store it in a place free from humidity. In this case, it is
advisable to loosen the blade in order not to keep it
uselessly tensioned.
6.2
REPLACEMENT OF THE COOLANT
The refrigerating emulsion must be replaced every 500
hours.
• Remove the plug from the wall outlet to disconnect the
machine.
• Empty the pump tank by removing cap
C (Fig. 11)
and
remove the chips inside of it, if any.
• Prepare the new emulsion, as specified at item 4.1 and
pour it inside the tank. Make sure that the emulsion is
properly disposed of.
• For emulsion disposal, please refer to item 6.4.
6.3
AFTER-SALES SERVICE
In case of repair under guarantee, the receipt/purchase
invoice must be presented together with the machine.
The absence of this document will invalidate the guarantee
applied to the machine.
Should the presence of skilled personnel be necessary for
extraordinary maintenance work or in case the repair is
effected both under guarantee or after it, please always
contact an authorised centre or the dealer where you
purchased the machine, if an authorised centre is not
present in your region.
When you contact the after-sales service or the dealer,
always advise the purchase date of the machine and its
serial number engraved on the CE.
When ordering spare parts, information about the machine's
model, the serial number as well as the part code listed in
the spare parts table must always be given to the After-
sales Service.
6.4
DISPOSAL OF THE MACHINE, PACKING AND
EMULSION
At the end of the machine life, if the
machine must be scraped, contact
an authorised waste disposal centre
in order to comply with the Standards
for hygiene and environment
safeguard.
The packing must be disposed of
according to the ruling standards by
delivering it to authorised people for
the collection, disposal or reclaim.
The recovered refrigerating emulsion can not be disposed
of in the environment since according to the governing
laws it is classified as special waste and as such must be
delivered to people that are authorised to effect the
collection, stocking and disposal.
Please contact the ASSOCIATION OF USED OILS near to
you.
2002/96/EC
