1. Arrange motor cover over hood of tractor.
2. Slide 3” hem of motor cover down over top of door
post.
MOTOR COVER
1. Insert yoke (A) into top 3” hem of motor cover.
2. Attach yoke to yoke bracket using two (2) 1/4” x 3/4”
bolts and nuts
3. Attach yoke to door post using one (1) 1/4” x 1” bolt
and nut.
Note
: Head of bolt inside, nut outside.
4. Tighten
center bolts only.
YOKE
A
1. Cut plastic Dual Lock® into 2” lengths.
2. Surface must be cleaned with a mild detergent to as-
sure proper application of Dual Lock® strips.
NOTE: Do not peel the backing from the Dual Lock® .
3. Apply cut Dual Lock® to all Dual Lock® sewn to motor
cover.
4. Arrange motor cover to tractor. Peel backing from Dual
Lock® and apply to tractor. Repeat this procedure for
all Dual Lock® .
DUAL LOCK®
is a registered trademark of the 3M Co.
